• Fundamental and useful capability to measure S-parameter over a broad frequency spectrum assists in several analysis domains

• Complete eciency in low frequency range while working with test port dedicated to gain-phase genuinely gives designers full control over their LF elements and networks

• For increased reliability, the E5061B empowers users to investigate modules and networks as a part of electronic hardware in the automation, medical, analytical and space engineering sectors

• The wide scope of low-frequency equipment like sensor networks and DC-DC conversion utilized in wireless and radio communication technology facilitates users to increase the efficiency and quality standard of deliverables

• Choose the appropriate configuration as per your testing requirements from a broad set of testing resources. Users may choose frequency starting from 100 kHz all the way up to 1.5 GHz/ 3 GHz, two-port, 50 or 75-ohm, type of communication or test sets for Scattering parameters

• Users can take measurements between multiple frequency ranges: 5 Hz to 500 MHz/1.5 GHz/3 GHz with an optional choice of LF-RF NA

• Users can generate custom-built platform by integrating network and impedance analysis using a single device (availabilities include 3L5/3L4/3L3 plus 005)

Network analyzer software platforms allow users to examine hardware, identify errors, and troubleshoot designs, taking multiple measurement requirements into account. Even complicated analysis is made much easier by the E5061B through user-friendly software for wireless network analysis, frequency domain analysis etc.

E5061B-010 Fault Discovery

• Time domain view to identify errors by pinpointing breakages and inconsistencies within wires and links.

• Impedance Analysis of E5061B allows the analyzer to measure impedance values of electronic elements, including energy storage components.

E5061B-006 Wireless Power Distribution Analysis

• Registers real-time eciency of Wireless Power Transfer (WPT) within the resonators or coils with arbitrary configuration of load-impedance

• Scattering parameter test port supports frequency range from 5 Hz to 3 GHz, 50 ohms

• Gain-phase testing port work starting at 5 Hz frequencies and reaching 30 MHz, with two options of 1M ohm/50 ohm

• Broad dynamic scope

• Intuitive DC bias source with voltage ranging between ±40 Vdc

• User-friendly multi-targeted solution